• Aluminum Can Shredder, Aluminum Shredder, Cans Shredder, Beer Can Shredder

Scrap Aluminum Can Tin Can Shredder Machine

Scrap aluminum comes from various sources including buildings, vehicles, computers, cookware, transmission housings, radiators, sheet, cast, clips, extrusion, profiles, window/door frames and more. Used beverage cans/containers are the largest component of processed aluminum scrap, with most UBC scrap manufactured back into aluminum cans.
In aluminum’s recycling process, the collected aluminum scraps are firstly shredded into small pieces. After size reduction, the aluminum shred will be fed into de-coater to de-lacquer paint or other materials. At last, the de-coated shreds will be melted in furnace and further produced into ingots which serve as a raw material for making new aluminum products.

  • Descripción de Productos
  • Parámetros Técnicos
  • Vídeo

Application:
Scrap Aluminum Can Tin Can Shredder Machine is suitable for shredding a wide array of applications and industries, suitable for shredding solid material such as red brull cans, beer cans, beverage cans, aluminum cans, canst.

Description:
As recycling does not transmute the element, aluminum can be recycled over and over again without any loss of quality. Attribute to this property, aluminum is one of the most recycled and most recyclable materials in consumer and industrial waste stream. Recycling of aluminum produces significant cost savings over the production of new aluminum, even when the cost of collection, separation and recycling are taken into account. Besides saving cost, it also benefits environment as recycled aluminum uses only 5% of the energy that would be needed for making new aluminum. Aluminum shredder such as aluminum can shredder is one of the popular recycling machine in aluminum recycling.
Scrap aluminum comes from various sources including buildings, vehicles, computers, cookware, transmission housings, radiators, sheet, cast, clips, extrusion, profiles, window/door frames and more. Used beverage cans/containers are the largest component of processed aluminum scrap, with most UBC scrap manufactured back into aluminum cans.
In aluminum’s recycling process, the collected aluminum scraps are firstly shredded into small pieces. After size reduction, the aluminum shred will be fed into de-coater to de-lacquer paint or other materials. At last, the de-coated shreds will be melted in furnace and further produced into ingots which serve as a raw material for making new aluminum products.

double shaft shredder blade:
Plastic Metal Tire Double Shaft Shredder BladesWorking principle:
Scrap Aluminum Can Tin Can Shredder Machine is to cut and shred the materials through the relative rotating of the two sets of cutter shaft, the mutual shearing among the blades of moving knives & the cutter heads and the distance sleeves. The outlet-material control of double-shaft shredder is adopted the network design, the width and length of outlet-material is determined on the width of the cutter, and the distance of cutter heads. Two groups of cutter shaft is rotating on different speed which lead to the shearing and shredding materials simultaneously, it improves the efficiency of shredding.

Components:double shaft shredder components

Technical Features:
1.Our shredders can be employed as either a primary or secondary shredder and can be seen working anywhere from the waste management company to biofuel producers;
2.Dual shafted, slow-speed, high-torque waste shredder with hardened steel cutters;
3.The two cutting rotors powerfully grab the feed material, and no matter the feed material is large piece of hard plastic or heavy tires, this machine can easily shred them into small pieces;
4.Double shaft shredder is able to process a number of different materials; shredder is designed with a powerful engine, long working length and aggressive input, Internal feeding volume bigger than traditional and common single shaft shredder machine and allow you using forklift truck to feed.
5.Heavy structure: the frame and structure of our shredders are made of high-thickness sheets and tubular. Blades are manufactured from high quality steel, suitable for shredding tough materials and for extra long life;
6.Depending on the requirement, these discs (blades) are available in a wide range of quantities, qualities and shapes with the new double-shaft shredder;
7.Any overloads caused by foreign material are sensed by the PLC controller and cause the shaft rotation to stop and reverse direction to clear the foreign matter, and then resume;
8.Cutters removal and replacement can be carried out safely and simply.
9.Our shredders Use a planetary reducer, not a traditional gearbox, and the planetary gearbox has the following advantages: High Efficiency, Greater Stability, Compact Size, Higher Torque Density, Cost Effective Precision, High Radial Loads.

Leave a Reply

Your email address will not be published. Required fields are marked *

Model Shredder
Motor
Power
(kw)
Shredding
Chamber
Size
(mm)
PNSS-300 5.5 510×300
PNSS-400 7.5 510×400
PNSS-600 7.5+7.5 510×600
PNSS-800 11+11 600×800
PNSS-1000 18.5+18.5 800×1000
PNSS-1200 30+30/22+22 1000×1200
PNSS-1400 45+45 1400×1200
PNSS-1600 55+55 1600×1200
PNSS-1800 75+75 1800×1400
PNSS-2000 90+90 2000×1400

Video

Lista de Productos