Working Principle of Without Wire Mesh Melt Filter

Time:2021-06-30

When the melt filter without wire mesh is working, the water taken by the water is passed from the water, flowing through the filter, through the outlet to enter the pipe, the process circulation, the particle acrobatics in the water is trapped inside the filter. Such continuous cycles, more and more particles, the filtration speed is getting slower, while the imported sewage is still constantly entering, the filter holes will get smaller, thereby incorporated, outlets Difference, when a large difference reaches the set value, the differential pressure transmitter transmits the electrical signal to the controller, and the control system start the drive motor rotates through the transmission assembly, and the sewage opening is opened, and the fillet is discharged, when the filter After the cleaning is complete, the differential pressure drops to the minimum, the system returns to the initial filter, and the system runs normally.

pelletizer filter without wire mesh, no mesh melt filter, screen changer, melt filter, continuous melt filter

The melt filter without wire mesh consists of a housing, a multi-filter element, a backwashing mechanism, and a differential pressure controller. The transes in the housing are divided into upper and lower cavities, and there is a plurality of filter cents in the upper cavity, which sufficiently filtered space, significantly narrowing the volume of the wireless mesh filter, and installing in the lower chamber There is a reversing suction cup. When working, the turbid fluid enters the filter under the filter and enters the lumen of the filter element via the separator hole. The impurities greater than the filter core are intercepted, the cleansing through the gap reaches the upper cavity, and finally sent from the outlet.

pelletizer filter without wire mesh, no mesh melt filter, screen changer, melt filter, continuous melt filter

The melt filter without wire mesh uses a high-strength wedge filter, and the automatic cleaning filter is automatically cleaned by differential pressure control. When the inclusion of impurities in the filter increases to the set value in the surface of the filter element, the electric control box is transmitted, and the electric control box is transmitted, drives the backwash mechanism when the timer reaches the preset time. When the reverse washing suction disc is correct, the sewage valve is opened, at which time the system is discharged, the suction cup is lowered from the inside of the filter element, which is lower than the diaphragm of the filter element, forcing part of the net circulating water from the outside of the filter. In the inside of the filter element, the impurity particles adsorbed on the inner wall of the filter element flow into the plate with water and discharged from the drain valve.
Specially designed screens make the inner injection effect inside the filter element, and any impurities will be held from a smooth inner wall. When the wire filter of the wire filter is constant or the timer set time ends, the material is not broken, and the anti-water consumption is small, and continuous automated production.

Leave a Reply

Your email address will not be published.